Introduction of Magnetic Levitation Test Sieve

Tuesday March-21 2023  15:50:51

Magnetic Levitation Test Sieve is a combination of three functions, 1. Vibration up and down. 2. Reciprocating motion back and forth. , the finest sieve to 5 microns, Magnetic Levitation Test Sieve, is a new type of vibration screening equipment that covers mechanical physical movement and high-frequency electromagnetic vibration, and integrates the two physical vibrations. The working parameters meet the national industry standards , with the use of experimental sieves and sample sieves; for industries such as: chemical, metallurgy, abrasives, food, medicine, and other industries for screening, inspection, and production work.

1. Magnetic Levitation Test Sieve has beautiful appearance, low noise, light volume, elegant appearance and convenient operation. Equipped with timing controller, the working time can be adjusted at any time.

2. Applicable materials: fine particles, metal powder, carbon powder, chemical powder, food powder, pharmaceutical powder, diamond powder building materials, dyes, ceramics, rubber, paper, dry and wet powder, etc.

3. Widely used in: mining, exploration, geology, chemical industry, pharmaceuticals, dyes, biology, abrasives, food, tea, schools, ceramics, national defense, etc.

4 The function and principle of magnetic suspension vibrating screen for various difficult-to-screen materials (sticky materials, light materials, fine powder, slurry, etc.)

The motor drives the gear to the main shaft through the synchronous belt. After the gear changes speed, the main shaft rotates at the required speed.

The Magnetic Levitation Test Sieve is based on: electromagnetic plus vibrating device as the vibration source. Its principle: after electrification, the electromagnetic device forms a magnetic field, and the vibrating device is suspended in the middle of the magnetic field, forming a high-frequency vibration up and down. A set of sieves arranged from coarse to fine on the tray makes the materials in the test sieve and sampling sieve vibrate and move up and down, left and right, so that only materials with the same particle size are left in each layer of test sieve and sampling sieve , to achieve the separation of different particle sizes.

Magnetic Levitation Test Sieve Features:

1. Strong stability; gears are used to drive the "synchronous belt" transmission mode, and the transmission is accurate and consistent; the speed ratio is accurate, and there will be no speed drop or belt slippage. The equipment is equipped with a digital display timer. After setting the time Automatic shutdown at that time.

2. The cost of repair and maintenance is low; because the "synchronous belt" is used to connect the two gears, the gears will not wear out and have a long service life (only the "synchronous belt" needs to be replaced for maintenance). The adopted bearing is a standard part, which is not easy to wear, has low cost and is easy to replace.

3. The screening efficiency is high; the screening method has three kinds of movements: reciprocating, swinging, and up and down vibration, which will not block the screen surface, and the material can be quickly and thoroughly screened.

4. Small size, clean and easy to operate; each function can be operated independently on the operation panel.

Trial Operation Items of Magnetic Levitation Vibrating Screen

1 First screw the anchor screw to fix the sieve machine. Then turn on the power supply (the power supply is two electrics. 220-volts). The sieve machine is equipped with a digital display timer. The time should be set before turning on the power. It will automatically stop when the time comes.

2 After the power is turned on, press the green start button. The timer shows that it is working. Then turn on the vibration switch. It can be adjusted according to the strength of the vibration. The red button on the left knob stops.

3 The motor switch is installed on the panel (green is running, red is stopping)