Slap Type Test Sieve has two vibration modes of slapping and reciprocating at the same time. The feeding is fast and the material is not easy to clog. It is suitable for the inspection of the particle size composition of ordinary abrasives and the production classification and particle size composition inspection of superhard materials.
Price: $550.00-$1,400.00/Set Chat Now
Sieve diameter: 75mm, 200mm, 300mm
Slap times: 156±3 times/min
Slapping height: 38±6mm
Number of rotations: 290±6 times/min
Voltage: 220V/380V
Rotation stroke: 25mm
Level: 1-8 floors
Screening and measuring powder and granular materials in laboratories and scientific research departments
Quantity(sets) | 1-2 | >2 |
Delivery time(days) | 5 | To be negotiated |
Slap Type Test Sieve is one of the commonly used testing instruments in the laboratory. During the sieving process, it can have dual motions of reciprocating and slapping at the same time. The material is fast and the sieve surface is not easy to block. It is especially suitable for the production and classification of diamond micropowder and superhard materials. process, high-intensity, high-frequency repeated use.
Slap Type Test Sieve metal powder material test
Abrasive Detection
Sieve fine powder
Slap Type Test Sieve is suitable for the inspection of the particle size composition of ordinary abrasives, the production classification of superhard materials and the inspection of material composition such as: grinding powder, silicon powder, grass carbon particles, aluminum hydroxide, ore, coal, abrasives, quartz sand, sand, activated carbon , Tungsten powder, polypropylene, glaze, soil, diamond and other materials.
Slap Type Test Sieve is used for diamond testing. The meshes are 30 mesh, 35 mesh, 40 mesh, 45 mesh, and 50 mesh. Two sets of top cover and chassis
Slap Type Test Sieve Sieve glaze, sieve mesh 80 mesh, 100 mesh, 140 mesh
Slap Type Test Sieve Detect feed, sieve machine amplitude 35mm±10mm, vibration frequency 220 times/min, slap times 150 times/min, plane rotary motion
Sieve activated carbon, choose diameter 200mm Slap Type Test Sieve
Slapping sieve Screening ore/coal
Sieve silicon powder Mesh: 20 mesh-200 mesh, particle size between 0.85mm-0.075mm, recommended BZJ-200 type Slap Type Test Sieve
Single-seat type: only one set of material tests can be carried out.
Two-seat type: It adopts the same basic design as the single-seat type, but it can accommodate two sets of 200mm test sieve frames to be stacked, and two sets of different material tests can be carried out at the same time.
model | Number of shakes/rotations(times/minute) | Number of beats(times/minute) | Slap height(mm) | Screen frame diameter(mm) | Motor Power(kw) |
200mm Slap Type Test Sieve | 290 | 156 | 38 | 0.37 | φ200 |
300mm Slap Type Test Sieve | 290士6 | 156士3 | 38士6mm | 0.55 | φ300 |
Slap Type Test Sieve consists of slap hammer, hammer stroke adjustment lever, hammer transmission gear, stainless steel sieve frame, sieve frame tray, timer, motor, and base.
Slapping hammer: Use a vibrating motor to vibrate the screen. During this process, the small beating hammer on the top continuously beats the top cover, and the materials that are easy to clog will be dispersed and penetrate the screen smoothly during the vibration and beating process, so that it is not easy to clog.
Screen: There are two diameters: 200mm and 300mm. The types of screens include wire woven mesh (mesh size 0.02mm-2.36mm), punching plate (mesh size 1mm~125mm), electroforming (mesh size 5μm ~ 500μm).
Time relay: The vibrating screen time can be freely controlled by setting the time, and the time can be adjusted from 1 minute to 99 minutes to ensure test repeatability and inspection production consistency.
Transmission device: the synchronous belt adopts the transmission mode of gear transmission, the speed ratio is accurate, the accuracy rate can reach 99.99%, there will be no phenomenon of speed drop, there is no direct contact with the two gears of the screen, the degree of wear is small, and the service life is longer .
Slap Type Test Sieve uses the vibration motor to drive the gear to the main shaft according to the synchronous belt. After the speed is adjusted by the gear, the main shaft rotates according to the specified speed ratio. The two groups of test sieves from large to small shake from side to side, and at the same time, the main shaft drives the jumping lever gear to rotate. The material in the sample sieve reciprocates and vibrates up and down, so that the raw material particles below the mesh of the test sieve are sieved into the lower test sieve, so that only the raw materials with the same particle size remain in each test sieve. To achieve the peeling of different particle sizes and to clarify the particle size composition of this material.
NO | Name | Unit | Parameter |
1 | Sieve diameter | mm | Φ200 |
2 | The quantity of layer | s | 1-7 |
3 | Number of revolution | Timed/min | 290±6 |
4 | tapping | Timed/min | 1-4 |
5 | Tapping height | KN | 38±6 |
6 | Levelness of the base | mm/min | ≤0.6 |
7 | Motor powder | KW | 0.37 |
8 | Powder supply | V | 380,220 |
9 | Outside dimension | LWH | 433*432*785 |
10 | Rotation distance | mm | 25 |
Step 1: Prepare the screen frame. The screen frames are arranged in sequence and the material is placed on the top layer.
Step 2: Place the screen. Place the screen in the center of the tray and place the leather pad and top cover.
Step 3: Adjust the height of the screen frame. Raise the screen frame to the right height.
Step 4: Fasten the position. Tighten the nuts on both sides to tighten the position of the tray.
Step 5: Adjust the height of the hammer. Adjust the height of the weight support shaft and tighten it.
Step 6: Set the time. Set the time parameters to run.
Step 7: Activate the switch.
Nanjing ** Pharmaceutical Company
[Customer order] Equipment name: BZJ-200 Slap Type Test Sieve (quartz sand slap screen), quantity: 1 set, packaging: wooden box (not recycled), manual: 1 copy
Datong **** Activated Carbon Co., Ltd.
[Customer order] Equipment name: BZJ-300 belt Slap Type Test Sieve, quantity: 1 set, packing: wooden box (not recycled), manual: 1 copy
Anhui ** Engineering Materials Technology Co., Ltd.
[Customer order] Equipment name: BZJ-300 Slap Type Test Sieve (abrasive), Quantity: 1 Packing: wooden box (not recycled), manual: 1 copy
Gongyi City ** charge processing factory
[Customer order] Equipment name: BZJ-200 gear Slap Type Test Sieve, quantity: 1 set, packing: wooden box (not recycled), manual: 1 copy
Slap times: 156±3 times/min
Price: $650.00-$1,500.00/Set
Aperture: 0-0.038mm
Price: $450.00-$1,400.00/Set
Screening accuracy:5 µm
Price: $650.00 - $1,200.00/Sets
Screening particle size: 0.025-3mm
Price: $650.00 - $800.00/Set
Slap Type Test Sieve is mainly used in laboratories within universities/research institutes/enterprises, with standard test sieves for particle size analysis and detection of granul...
Slap Type Test Sieve Structure and Principle
Slap Type Test Sieve is mainly composed of slap hammer, hammer stroke adjustment lever, hammer transmission gear, stainless steel screen frame, screen frame tray, timing switch devi...
Slap Type Test Sieve Selection Notes
1. Clarify the purpose of your purchase If you are buying for a laboratory, you must require a standard sieve with exquisite appearance, beautiful appearance and fast mesh, which ha...
Which is better, Gear type Slap Sieve or Belt type Slap Sieve?
The Gear-type Slap Sieveis installed on a horizontal foundation with anchor bolts, and the circuit and grounding are installed according to electrical regulations. The Gear-type Sla...
Are you interested?
Then we look forward to hearing from you
Contact Us
Industrials
Yanjin county forest park gate to the west 1000 meters north road sitemap